Tikiake i ngā Whakatakotoranga me ngā Ahu o te I beam Hou.
EN 10025-2 S235JR I Kurupae mō te Hanga me te Hangarau
| Paerewa Rauemi | EN 10025-2 S235JR I Kurupae |
| Ngā Ahu | IPE 80 – IPE 600 (mm) |
| Manawanui Ahu | E rite ana ki te EN 10279, ki te EN 10034 rānei |
| Te Kaha o te Hua | S355JR: YS ≥ 235 MPa, TS ≥ 360–510 MPa, e tika ana mō ngā hanganga waenga ki te taumaha |
| Whakaotinga Mata | Te whakapūmau wera-tō, te peita, me ētahi atu. Ka taea te whakarite |
| Roa | He taonga mō te 6 m me te 12 m, he roa kua whakaritea |
| Tiwhikete Kounga | Pūrongo Tirotiro Tuatoru ISO 9001, SGS/BV |
| Ngā tono | Ngā whare ahumahi, ngā whare putunga, ngā whare arumoni, ngā whare noho, ngā piriti |
Raraunga Hangarau
Kurupae Rino ITe Hanganga Matū
| Te Kaupae Rino | C (mōrahi) | Si (mōrahi) | Mn (mōrahi) | P (mōrahi) | S (mōrahi) | N (mōrahi) | Ngā Tuhipoka |
| EN S235JR | 0.17–0.20 | 0.35 | 1.4 | 0.035 | 0.035 | 0.012 | maitai hanganga whānui |
| EN S275JR | 0.2 | 0.35 | 1.5 | 0.035 | 0.035 | 0.012 | Te maitai hanganga kaha waenga |
| EN S355JR | 0.22 | 0.55 | 1.6 | 0.035 | 0.035 | 0.012 | Te maitai hanganga kaha teitei |
Ngā Rahi Kurupae IPE EN 10025
| Tauira | Ngā Ahu (Teitei × Whānui × Matotoru o te Tukutuku × Matotoru o te Pēneti) mm | Taumaha mō ia mita (kg/m) | Ngā tono noa |
| IPE100 | 100×55×4.1×5.7 | 8.1 | Ngā purlin mō ngā awheawhe iti, ngā tautoko hanganga maitai māmā |
| IPE120 | 120×64×4.4×6.3 | 10.4 | Ngā whare noho, ngā turanga mīhini iti |
| IPE140 | 140×73×4.7×6.9 | 12.9 | Ngā whata whare putunga, ngā kurupae piriti māmā |
| IPE180 | 180×91×5.3×8.0 | 22.9 | Ngā kurupae papa mō ngā whare maha-papa, ngā tautoko paipa ahumahi |
| IPE200 | 200×100×5.6×8.5 | 27.4 | Ngā anga awheawhe waenga, ngā kurupae me ngā pou mō ngā hanganga raima |
| IPE220 | 220×110×5.9×9.2 | 33.1 | Ngā whare arumoni, ngā kurupae turanga taputapu taumaha |
| IPE300 | 300×150×7.1×10.7 | 48.3 | Ngā kurupae matua mō ngā whare putunga nui, ngā awheawhe ahumahi māmā |
| IPE360 | 360×170×8.0×12.7 | 57.1 | Ngā hanganga maitai teitei, ngā hanganga āwhina piriti |
| IPE400 | 400×180×8.6×13.5 | 67.4 | Ngā awheawhe ahumahi taumaha, ngā pou matua mō ngā wāhi nui |
Pāwhiritia te pātene kei te taha matau
Kurupae IPE(e mōhiotia ana ko te kurupae-I Pākehā, ko te Flange Whakarara rānei) he momo kurupae maitai e: Ka taea te kī he kurupae āhua "I" me ngā flange kurupae whakapae kei runga, kei raro hoki, me te tukutuku kurupae poutū kei waenganui.
He ngāwari te hononga me te tohatoha ahotea ōrite i te rohe o ngā flange whakarara
He pai te ātete piko o te wāhanga-I
Ngā rahi paerewa mō ngā karaehe maitai EN 10025 (S235JR, S275JR, S355JR)
He pai ake te whakamahi mō ngā anga hanganga i roto i ngā whare nā te mea he tino pai te ōwehenga kaha-ki-taumaha.
Ngā Whakamahinga Noa o ngā Kurupae IPE
Hanganga Whare
Ngā whare awatea: Ngā kurupae papa me ngā tautoko tuanui
Ngā whare ahumahi me ngā whare arumoni: Ngā anga hanganga, ngā papa mezzanine
Ngā whare teitei: Hei kurupae matua mō te pikaunga
Ngā Piriti me ngā Hanganga
Ngā papa me ngā tautoko piriti iti ki te waenga
Ngā ara whakawhiti me ngā piriti mō ngā tāngata haereere
Ngā Kaupapa Ahumahi
Ngā wheketere, ngā whare putunga, me ngā whare putunga
Ngā taputapu taumaha e amo ana i te kawenga me ngā kerene o runga
Hanganga Rino
Ngā whare whakarerekē, ngā whare kua oti te hanga me ngā wāhanga maitai
Ngā anga mō ngā wāhi hanga kaipuke, Ngā whata rokiroki me ngā pereti
Ngā Hanganga Motuhake
ngā ara hīkoi / ngā papaaho waenga, me ētahi atu
Whakapakarihia mō ngā mahi kauhanga me ngā mahi raro whenua
He Painga i roto i ngā Tono
He pai tōna kaha ki te piko me te kutikuti, ā, he teitei anō hoki tōna kaha ki te pikau kawenga.
Ngāwari: He maha ngā kōwhiringa roa me te hohonu e taea ana (hei tauira, IPE 100 ki te IPE 600)
Ngāwari o te Huihuinga: He māmā te keri, te whakarewa me te whakapiripiri mā te whakamahi i ngā parirau whakarara
Ōhanga: Kaha engari kāore i te taumaha rite ki te maitai
1) Tari Peka - tautoko reo Pāniora, āwhina whakawātea tikanga, me ētahi atu.
2) Neke atu i te 5,000 tana o ngā taonga kei roto i te taonga, me te whānuitanga o ngā rahi
3) I tirotirohia e ngā whakahaere mana pēnei i a CCIC, SGS, BV, me TUV, me ngā takai paerewa mō te moana
I. Ngā Tukanga Tākai
Te here:Herea ngā kurupae-I ki ngā whitiki maitai, ki ngā whitiki nairona rānei kia rite ki ngā whakaritenga kia māmā ake ai te whakamahi.
Papa Rūpahu/Papa Tauira: Whakamahia ngā papa rakau/papa tauira hei whakatakoto i ngā paihere ki runga kia matara atu i te whenua, hei tiaki hoki i ngā paninga mai i ngā karawarawa, i te tomairangi/te maturuturunga ua rānei.
Te Tiakitanga:
Whakatakotoria he ārai kokonga, he ringaringa kirihou rānei ki ngā taha me ngā pito.
Tākaihia ki ngā pepa ātete wai, ki ngā pepa kirihou rānei hei ārai i te waikura i te ua, i te makuku rānei.
II. Ngā Tikanga Kawe
Te Waka Whenua:
He tino pai mō te kawe waka ā-rohe, mō te kawe waka poto rānei.
Kōwhiria ngā taraka mārō, ngā taraka papatahi, ngā taraka iti rānei e hono ana, ka taea te here pūmau i te kawenga kia kore ai e nekeneke.
Te Waka Tereina:
He mea tika mō ngā kawenga papatipu tawhiti.
Kia mau ki ngā ture mō te kawe waka tereina, kia haumaru te utanga, ā, whakamahia he rauemi whakakī tiaki.
Te Waka Moana:
Mō ngā kaweake, mō ngā kawe taonga whakawhiti-rohe rānei i roto i ngā ipu, i ngā kaikawe papatipu rānei.
Herea ngā kurupae, taupokina ki ngā tāpare ārai wai, ka rongoa ki roto i te pouaka kia kore ai e neke.
III. Ngā Mea hei Mahara
Kaua e pā, kaua hoki e mirimiri i te wā e uta/tango ana, kia kore ai e kino te mata o te maitai.
Me tirotirohia ngā whitiki me ngā kēne whakau i ia wā, i ia wā, i ngā ika e toia ana i tawhiti.
Whakamahia he maimoatanga ārai waikura nui mō te hau makuku, mō te hau takutai moana rānei.
He pai te mahi tahi a ngā kamupene kaipuke pēnei i a MSK, MSC, COSCO, ā, he pai te ratonga kawe ratonga, he pai hoki te mekameka ratonga kawe ratonga ki a koe.
E whai ana mātou i ngā paerewa o te pūnaha whakahaere kounga ISO9001 i roto i ngā tukanga katoa, ā, he tino kaha tā mātou whakahaere mai i te hoko rauemi tākai ki te whakaritenga waka kawe.
1. He aha te EN S235JR I-Beam?
Ko te EN S235JR I-Beam he kurupae maitai hanganga i hangaia kia rite ki te paerewa EN 10025, e whakamahia whānuitia ana i roto i ngā hanganga hanga me ngā hanganga ahumahi nā tōna kaha pai me tōna ngāwari ki te whakarewa.
2. He aha te kaha tuku o te maitai S235JR?
Ko te kaha whakaputa iti rawa ko 235 MPa, me te kaha kume i waenga i te 360–510 MPa.
3. He aha ngā rahi e wātea ana mō ngā S235JR I-Beams?
Ko ngā rahi noa kei waenga i te IPE 80 ki te IPE 600, me te roa paerewa o te 6 m, 12 m rānei, ā, e wātea ana hoki ngā roa ritenga.
4. He aha ngā tono matua?
E whakamahia whānuitia ana ngā I-Beam S235JR i roto i ngā anga hanga whare, ngā piriti, ngā whare putunga, ngā wheketere, me ngā tautoko hanganga.
5. Ka taea te whakarewa, te tukatuka rānei i ngā I-Beam S235JR?
Āe. He tino pai te maitai S235JR ki te whakarewa me te miihini, he mea pai mō te tapahi, te keri, me te whakarewa i roto i ngā kaupapa hanganga maha.
Ngā Taipitopito Whakapā
Wāhitau
Te rohe ahumahi whanaketanga o Kangsheng,
rohe Wuqing, Tianjin pa, Haina.
Ī-mēra
Ngā Hāora
Mane-Rātapu: Ratonga 24-hāora
-
Rauemi Hanga Kaha Teitei A36 Q195 Q235 C...
-
Utu Pai rawa atu GROST Paerewa P18 Koranu Tere Tere...
-
Paipa maitai waro ASTM A53 Gr.B i whakarewahia mō te wai...
-
Waro Papatahi Hurihia Wera/Matao, Karaehe Q345b...
-
Hanganga Anga Rino Hoahoa Hou, Hanganga Rino Pakari...
-
Q235 Q345 Ss400 Wera Hurihia Erw Weldi ...
