Kaiwhakarato Kowiri Rino Pirau Kua Peita-Mua (PPGI) Kounga-Teitei | Ngā Tae Ritenga me te Tukunga Tere
| Taonga | Whakatakotoranga | Taonga | Whakatakotoranga |
| Paerewa | GB/T 2518, EN 10169, ASTM A755/A755M, JIS G 3312 | Ngā tono | Tuanui, panera pakitara, taputapu, whakamahinga whare |
| Papa raro | DX51D+Z, DX52D+Z, DX53D+Z, SGCC | Mata | He maeneene te āhua, he ātete pai ki te waikura |
| Matotoru | 0.12 – 1.2 mm | Tākai | Takai ātete-makuku + whitiki maitai + papa rakau/maitai |
| Whānui | 600 – 1500 mm, ka taea te whakarite | Momo Paninga | Ngā kōwhiringa PE, SMP, PVDF |
| Paninga Konutea | Z80 / Z100 / Z120 / Z275 karamu/m² | Matotoru o te paninga | Mua 15–25 µm, Muri 5–15 µm |
| Te Maimoatanga Mata | Te maimoatanga matū i mua + te peita (maeneene, mā, pērara, ārai-matimati) | Te pakeketanga | HB 80–120 (e whakawhirinaki ana ki te papa me te tukatuka) |
| Taumaha Pōkai | 3–8 tāne, ka taea te whakarite mō te kawe |
| Kāore. | Tau | Matotoru. (mm) | Whānui (mm) | Roa | Taumaha (Tana) | Ngā tono |
| 1 | DX51D | 0.12–0.18 | 600–1250 | Ritenga | 2–5 | Tuanui, panera pakitara |
| 2 | DX51D | 0.2–0.3 | 600–1250 | Ritenga | 3–6 | Ngā taputapu kāinga, ngā papa pānuitanga |
| 3 | DX51D | 0.35–0.5 | 600–1250 | Ritenga | 4–8 | Ngā taputapu ahumahi, ngā paipa |
| 4 | DX51D | 0.55–0.7 | 600–1250 | Ritenga | 5–10 | Te whakamahinga hanganga, te tuanui |
| 5 | DX52D | 0.12–0.25 | 600–1250 | Ritenga | 2–5 | Tuanui, pakitara, taputapu |
| 6 | DX52D | 0.3–0.5 | 600–1250 | Ritenga | 4–8 | Ngā panera ahumahi, ngā paipa |
| 7 | DX52D | 0.55–0.7 | 600–1250 | Ritenga | 5–10 | Hanganga, tuanui |
| 8 | DX53D | 0.12–0.25 | 600–1250 | Ritenga | 2–5 | Tuanui, pakitara, whakapaipai |
| 9 | DX53D | 0.3–0.5 | 600–1250 | Ritenga | 4–8 | Ngā taputapu ahumahi, ngā taputapu. |
| 10 | DX53D | 0.55–0.7 | 600–1250 | Ritenga | 5–10 | Ngā panera hanganga, mīhini |
Ngā Tuhipoka:
Ka taea te whakarato i ia momo (DX51D, DX52D, DX53D) i roto i ngā whakatakotoranga koiri ine angiangi, waenga, me te matotoru.
He pai rawa atu mō te mākete tūturu ngā whakamahinga kua tūtohutia e ahu mai ana i te matotoru me te kaha.
Ka taea hoki te whakarite i te whānui, te roa o te koiri me te taumaha o te koiri kia rite ki te hiahia o te wheketere me te kawe waka.
Tō mātoukoiri maitai pania tae(PPGI) e tautoko ana i te whakaritenga katoa kia rite ki ō hiahia kaupapa ahurei.
Ka tukuna e mātou ngā papa tae atu ki te DX51D, DX52D, DX53D, me ētahi atu paerewa ina tonoa. Kei te wātea ngā taumaha paninga konutea mai i te Z275, e whakarato ana i te mahi ārai-waikura tino pai. He pai ake te papatahi o te mata o te rauemi, ā, he pono hoki te hanga.
Ngā Whakatakotoranga e Wātea ana
Matotoru: 0.12 – 1.2 mm
Whānui: 600 – 1500 mm (ka taea te whakarite)
Taumaha o te pōkai me te roa o te pōkai: Ngāwari, ā, kua whakaritea kia rite ki ō whakaritenga whakaputa me te tuku
Tō mātou mahi tino paiNgā koiri maitai PPGIwhakakotahi i ngā whakaotinga mata ma, ātaahua. He whānuitia te whakamahinga mō ngā pepa tuanui, te whakakikorua pakitara, ngā wāhanga taputapu kāinga, ngā mīhini ahumahi me ngā rauemi hanga.
Ka whakarite tika mātou i ngā koiri maitai kia rite ki ō whāinga kaupapa, kia pai ake ai te whai huatanga, te roa o te mau me te kounga tirohanga pumau — ka āwhina i a koe ki te whakanui ake i te uara o ō rauemi mata.
| Paerewa | Ngā māka | Ngā Tuhipoka Matua |
| EN 10346 / EN 10142 | DX51D, DX52D, DX53D, DX51D+Z275 | He paninga konutea wera-toia, he paninga konutea 275 karamu/m2, he ātete pai ki te waikura. Mō ngā tuanui, ngā panera pakitara, ngā taputapu. |
| GB/T 2518 | DX51D, DX52D, DX53D, DX51D+Z275 | Ngā momo waro-iti noa, paninga konutea 275 karamu/m2. Hanganga, whare ahumahi, taputapu. |
| ASTM A653 / A792 | G90 / G60, Galvalume AZ150 | G90 = 275 karamu/m2 konutea. He pai rawa atu te ātete ki te waikura o te AZ150 galvalume. Ngā whare ahumahi me ngā whare arumoni. |
| ASTM A1008 / A1011 | CR Steel | Papa hurihuri matao mō te rauemi turanga PPGI. |
| Tae | Waehere RAL | Ngā Taupānga Noa |
| Mā kanapa | RAL 9003 / 9010 | He āhua whakaata ma — ngā taputapu, ngā pakitara o roto, te tuanui |
| Mā-Pōuri / Pēni | RAL 1014 / 1015 | He oro ngawari, he koretake — he whare arumoni, he whare noho hoki |
| Whero / Whero Waina | RAL 3005 / 3011 | He āhua huatau tawhito — he tuanui ahumahi, he whare wheketere |
| Kikorangi Rangi / Kikorangi | RAL 5005 / 5015 | Āhua hou — ngā whare arumoni, te whakamahinga whakapaipai |
| Hina / Hiriwa Hina | RAL 7001 / 9006 | He whakaotinga ātete-paru ahumahi — ngā whare putunga, ngā tuanui, ngā mata o mua |
| Kakariki | RAL 6020 / 6021 | Ārai taiao - whare māra, hanganga o waho |
Koiri maitai PPGIKei te whakamahia whānuitia i roto i ngā mara o te awheawhe whānui-nui, whare putunga, whare tari, whare, paparanga tuanui, rūma purenga hau, pouaka whakamātao, toa.
1. Te Hanga Whare
Te tuanui me ngā pepa kowakawaka, ngā panera pakitara, ngā tatau, ngā matapihi me ngā papa whakarara mō ngā wheketere, ngā whare putunga, ngā whare arumoni me ngā whare noho.
2. Te Hanga Taputapu Kāinga
Ngā anga mō ngā pouaka whakamātao, ngā mīhini horoi, ngā hauhautanga; ngā wāhanga kīhini tae atu ki ngā taupoki oumu me ngā panera kāpata.
3. Te kawe waka
Ngā ipu kawe waka, ngā whare waka, ngā taunga pahi me ngā papa pānuitanga o waho, he tino ātete ki te huarere me te waikura.
4. Te Hanga Ahumahi
Te tiakitanga mata mō ngā pūnaha paipa; te hanga whare me te uhi mō ngā mīhini ahumahi.
5. Ngā Taonga me ngā Whakapaipai Kāinga
Ngā tuanui, ngā panera wehewehe, ngā kāpata kōnae rino me ngā kāpata rokiroki mō ngā whakapaipai arumoni me ngā whakapaipai whare.
Tuhipoka:
1. Tauira kore utu, 100% te whakapumautanga kounga i muri i te hoko, Tautokohia tetahi tikanga utu;
2. Kei te wātea ngā whakaritenga katoa o te PPGI e ai ki tāu
e hiahiatia ana (OEM&ODM)! Ka whiwhi koe i te utu wheketere mai i a ROYAL GROUP.
Tuatahi kimīhini whakakoi -- mīhini tuitui, roera, mīhini tāroaroa, pukapuka tuwhera hurihuri horoi houra tango hinu -- horoi, whakamaroke whakakorenga -- i te tīmatanga o te whakamaroke -- pā -- te whakamaroketanga wawe -- whakaoti pai -- whakaoti whakamaroke -- Whakamatao-hau me te whakamatao-wai - hurihuri hurihuri -Mīhini hurihuri -----(me tākai te hurihuri ki te rokiroki).
Ko te tikanga, he mea takai ki te rino maitai me te ātete wai, he mea here ki te rino rīpene, he tino kaha.
Mena he whakaritenga motuhake āu, ka taea e koe te whakamahi i te takai ātete waikura, me te ataahua ake.
Te kawe waka:Tukunga Tere (Tukunga Tauira), Rererangi, Tereina, Whenua, Tukunga Moana (FCL, LCL rānei, Paparahi rānei)
1. Ko tēhea te taumaha o te paninga konutea me whiriwhiri e au?
E taunakihia ana te Z80–Z120 mō ngā mahi o roto. Tīpakohia te Z180–Z275 mō ngā taiao e pāngia ana e te waikura, e te pānga kino rānei.
2. Ka taea te whakarite i ngā rahi me ngā tae?
Ae. Ka tukuna e mātou he matotoru ritenga, he whānui me ngā tae RAL paerewa katoa.
Tukuna mai ō whakaritenga, ā, ka whakahokia atu e mātou he whakatau utu i roto i ngā haora 12.
3. Kia pēhea te roa o tō wā ārahi?
Ngā taonga kei roto i te toa: 7–15 ngā rā. Ka rerekē te roa o te wā tuku mō ngā ota ritenga i runga i te nui o te ota.
4. Me pēhea e whakamana ai koe i te kounga o te hua?
Ka whakaratohia e mātou ngā Tiwhikete Whakamātautau Mira (MTC), ka whakatinanahia e mātou he mahi QC tino pakari i roto i te whare, ā, ka whakaaetia hoki ngā tirotiro a te hunga tuatoru.
5. Me pēhea te tiki i tō utu whakataetae rawa atu?
Ko ngā utu ka whakawhirinaki ki ngā whakaritenga, ngā whakaritenga paninga me te rahinga o te ota.
Tukuna mai ō hiahia kia whiwhi ai koe i tā mātou tuku tika mai i te wheketere.
RŌPŪ KĪNGI
Wāhitau
Te rohe ahumahi whanaketanga o Kangsheng,
Takiwa o Wuqing, taone nui o Tianjin, Haina.
Ī-mēra
Ngā Hāora
Mane-Rātapu: Ratonga 24-hāora
